Class 1 Division 2 Edge Lit Exit Sign

SKU:
Weight: 0.0 lb
Shipping: Calculated at checkout
( Review)
FAST SHIPPING ALL ITEMS IN STOCK*
FAST SHIPPING ALL ITEMS IN STOCK*
MONEY BACK 100% GUARANTEE
MONEY BACK 100% GUARANTEE
30 DAYS HASSLE-FREE RETURNS
30 DAYS HASSLE-FREE RETURNS
LOWEST PRICE GUARANTEE
LOWEST PRICE GUARANTEE

This item is special order ONLY. Please contact our sales team for a quote!

 

The Class 1 Division 2 edge lit exit sign is one of the most affordable yet stylish exit signage applicable to explosive environments. The HLEX is rated for Class 1, Division 2 spaces where flammable gasses or vapors are present in the atmosphere and at such quantities to spark an explosion. Electronics in such areas must have sufficient airtight cabinets to prevent circuitry from igniting a dangerous chain reaction.

Our Class 1 Division 2 edge lit exit signs have a very thin, low profile design yet are highly resistant to flames, impact and weather damage.

Features

  • Copper-free cast aluminum housing
  • Built for Class I, Division 2 Hazardous Locations - Groups A,B,C & D
  • Applicable to Class III and II locations
  • UL 1598A Listed for Marine Outside Type
  • 3-hours of continuous emergency operation
  • IP65 Rated for dust ingress protection
  • Energy Star Rated

 

 

Application

This Class 1 Division 2 exit sign can be mounted directly to a wall, or at the ends for flag mounting. A ceiling pendant mount configuration can also be ordered. The sign can be mounted indoors or outdoors in the harshest Marine locations. These are popular egress fixtures on offshore oil platforms, paint spray rooms and refineries. The housing is sealed by a silicon O-ring gasket, ensuring the electronics will not be affected by flammable gases, vapors or dust.

External Specifications

The signs 'exit' legend is beveled into the clear acrylic sign panel in a UL-approved 6.5" lettering. A white sheet is inserted between the acrylic panel to increase visibility and accentuate the exit legend. The housing is made from impact-resistant cast aluminum that is given a baked-on epoxy outer coating for added weather protection.

Internal Specifications

When this C1 D2 edge lit exit sign is connected to AC power, only the 'exit' legend and the outer edge of the panel will light up. This is accomplished by a red or green LED strip secured inside the housing, coupled with a fully integrated electronic circuit board and sealed by the gasket. LEDs consume less than 5 watts of AC electricity, qualifying the sign as an Energy Star rated fixture.

AC power is fed to the unit via two 1/2" NPT conduit hubs on either side of the housing. For ceiling/pendant mounting configurations a third NPT is located at the top of the housing. Minimal periodic maintenance is required to keep the sign at 100% emergency efficiency. A 90 second monthly test and a yearly 90 minute test is all that is required. Purchase a Self Diagnostic feature to reduce maintenance even further.

Electrical Specifications 

  • Dual Voltage 120/277VAC Input
  • 60 Hz frequency
  • 220-240VAC and other voltages available upon request

 

Battery

Nickel Cadmium (NiCad) will last for 15 years. Recharge time: 24 hours.

Warranty

5-year warranty on housing, panel and components.

Lifespan

25 years

Options

Faces - choose single or double sided exit panels.

Mounting - Choose Wall, Pendant or end configurations.

Self Diagnostic - eliminates monthly and periodic testing by automatically assessing the battery, LEDs and circuitry. Alerts the user whenever there is a fault that could affect emergency illumination.

Euro Legend - select a green ISO-approved 'Running Man' legend instead of the word exit.

Reviews
review-image

Customers Also Viewed

Your cart is currently empty.

Continue Browsing