In addition to exit signs and emergency lighting, most facilities will require certain signage to indicate points of interest. That's why we offer our custom edge lit exit sign; basically a blank edge lit sign that can say anything you want it to!
Edge-lits are the best choice for high visibility, aesthetically pleasing signs which will continue to glow even during a power outage. They have a very thin profile and are a perfect fixture in upscale environments.
Best of all they are fully-customizable and you can literally make the signs read anything. You can even order internationally recognized pictograms or bi-lingual script.
Custom edge lit exit signs are very futuristic looking and energy efficient, using an LED illumination source which consumes less than 5 watts of electricity at all times. They can be attached to the ceiling or on a wall in either a back (single sided) or edge (double sided) mounting fashion.
Custom design your edge-lit sign to mark roof access, standpipes, wheelchair access, elevator, or 'Not An Exit' for doors which could be mistaken for an egress route.
Our CUSTOM-EDGE-LIT-EXIT-SIGN model has a rectangular brushed aluminum upper housing which contains all of the electronic parts and emergency backup components of the sign. A red push-to-test switch and LED charging indicator on the side allows you to quickly test the lamps and transfer circuits.
Your custom stencil is beveled into a clear acrylic panel by our manufacturer. When activated, the stencil and the outer trim of the panel will glow either red or green while the rest of the panel remains transparent. If you order a double-faced sign, a mirrored insert is slipped between the panel, creating the illusion of a single-faced sign when observed from either direction.
Inside the aluminum housing you will find the LED lamp, backup battery and transfer/charging circuitry. A brownout detection circuit will automatically sense any loss in AC power and activate the emergency battery.
Nickel Cadmium (NiCad) will last for 15 years. Recharge time is 24 hours.
5-year warranty on housing, panel and components
8-10 years
Pendant Kits - for suspending signs from high ceilings.
Housing Finishes - standard brushed aluminum or white powder coating.
Self Test - eliminate the need for monthly and yearly maintenance. Automatically alerts you if any element of the sign fails.