Overview
The Class 1 Division 1 Exit Sign is built to remain operational while surrounded by flammable vapors, gases, and liquids. A die-cast aluminum housing employs a fully gasketed design that will keep out flammable elements. This fixture uses an edge-lit design and red or green LED light strips to reliably illuminate "EXIT" in the color of your choice.
This Class 1 Division 1 Exit Sign is hermetically sealed to keep internal electrical components safe from flammable materials. LED lights consume less than 3 watts of electricity, while the nickel-cadmium backup battery provides 180 minutes of illumination when AC power is cut. This fixture connects using 120V or 277V dual voltage connection.
The Class 1 Division 1 Exit Sign is compliant with: Class I, Division 1, Groups C & D, Class I, Division 2, Groups A, B, C & D, Class II, Division 1, Groups E, F & G, Class III, Division 1, Class I, Zone 1, Groups IIA, IIB, Class I Zone 2, Groups IIA, IIB + H2 & IIC, UL 1598A, 844, 924, and Marine Outside Type.
Features
- Hermetic seal prevents flammable materials from igniting internal components
- Nickel-cadmium backup battery provides 90 minutes of emergency "EXIT" illumination
- Push button battery test allows for quick maintenance
- Visually appealing edge lit design
- UL 844, 924, and 1604 listed for use in the United States
External Specifications
The fully gasketed and hermetically sealed die-cast aluminum housing is Class 1 Division 1 listed to prevent flammable materials from entering the fixture. This fixture can be mounted to the wall and ceiling of most nonflammable surfaces with an optional pendant kit to reach inconvenient locations. The "EXIT" panel is made from durable acrylic that is available in shatterproof red or green.
Call for help with a custom graphic or legend.
Internal Specifications
Red or green light emitting diodes consume less than 3 watts of electricity while utilizing a low ripple current that maximizes the fixture's life and illumination. The self-diagnostic current charger circuit constantly monitors the backup battery and alerts the user via LED lights when the nickel-cadmium battery needs to be replaced.
Electrical Specifications
This fixture uses either 120V or 277V power when connected to AC and can be customized to run at 220V or 240V upon request. The battery is charged with solid-state circuitry that is surge-protected for reliable charging. Models can be equipped with a temperature compensated charger and all fixtures come standard with a push button battery testing system. Low voltage disconnect, brownout protection, and AC lockout are also standard features.
Battery Specifications
The Class 1 Division 1 Exit Sign uses a nickel-cadmium battery that provides 90 minutes of exit sign illumination. The Ni-Cd battery lasts for about 5 to 7 years. This fixture is also available without a battery for AC only use when connected to a generator.
Code Compliance
This fixture is compliant with Class I, Division 1, Groups C & D, Class I, Division 2, Groups A, B, C & D, Class II, Division 1, Groups E, F & G, Class III, Division 1, Class I, Zone 1, Groups IIA, IIB, Class I Zone 2, Groups IIA, IIB + H2 & IIC, UL 1598A, 844, 924, and Marine Outside Type.
Warranty
Three-year parts warranty, four-year prorated lead calcium battery warranty, and five-year nickel-cadmium battery warranty.
Maintenance Profile
OSH requires monthly and yearly testing of the backup battery system, which is easy with the push button tester.
Lifespan
All components are expected to last 8 to 10 years, except for the battery, which has an average lifespan of 5 to 7 years.
Options
- Flash in emergency mode: the exit sign will flash continuously during an emergency to warn occupants of danger.
- Custom legend: a custom graphic or word can be displayed on the exit sign. Call for more information.
Appeal
This fixture's durable housing is designed for Class 1 Division 1 environments.
Overall Value
The Class 1 Division 1 Exit Sign is built to last for 8 to 10 years, making it a great investment at a great price.
Installation
This fixture can be mounted to the wall and ceiling of most nonflammable indoor and damp location surfaces. Electrical installation is quick and painless: use the black (120V) and white (common) wires for 120V AC power or the red (277V) and white (common) wires for 277V AC power.
